![background image](http://html1.mh-extra.com/html/omron/ne1a-scpu01-07-2009/ne1a-scpu01-07-2009_operation-manual_742749096.webp)
61
Remote I/O Allocations
Section 4-3
Note
(1) For the NE1A-SCPU01-V1, N = 2 and M = 1. For the NE1A-SCPU02, N
= 5 and M = 2. The sizes of the local input status, test output/muting lamp
status, and local input monitor status data can be specified in bytes.
(2) The measures required for handling data as safety data in the data gen-
eration process will not be executed for status and I/O tag data items with
a non-safety attribute. Therefore do not use those items to configure a
safety system.
Moreover, even if the attribute for an item is “safety,” it will become “non-
safety” for data input using standard I/O communications or for I/O tags
connected with standard devices. Therefore, those items must also not
be used to configure a safety system.
If the above data is combined, the I/O data will be configured as follows:
1. When status data is set, the status is allocated at the beginning of the re-
mote I/O area in the order shown below. (Status areas that are not set are
not reserved, i.e., no unassigned areas are left.)
General Status
↓
Local Input Status
↓
Local Output Status
↓
Test Output/Muting Lamp Status
2. When the local I/O monitor data is set (Controllers with unit version 1.0 or
later only), the local I/O monitor data is attached after the other status data
in the following order. (When local I/O monitor data is not set, the data will
be shifted forward and that local I/O monitor area will not be reserved. This
area does not exist in Pre-Ver. 1.0 Controllers.)
Local Input Monitor
↓
Local Output Monitor
3. After the status data and local I/O monitor data, user-registered I/O tags
are allocated in the remote I/O area in the order of registration. At this time,
free areas are not reserved and all valid data is allocated with no unas-
signed areas.
Examples of settings from the Network Configurator are shown below, along
with the remote I/O area arrangements.
Summary of Contents for NE1A-SCPU01 - 07-2009
