![background image](http://html1.mh-extra.com/html/omron/ne1a-scpu01-07-2009/ne1a-scpu01-07-2009_operation-manual_742749113.webp)
78
Safety Slave Function
Section 4-5
Controllers with Unit Version 1.0 or Later
Note
For the NE1A-SCPU01-V1, N = 2 and M = 1. For the NE1A-SCPU02, N = 5
and M = 2. The sizes of the local input status and test output/muting lamp sta-
tus data can be specified in bytes.
Setting Local I/O Monitor Data
If the I/O type of the Safety Slave I/O is set to Slave IN for a NE1A-series
Controller with unit version 1.0 or later, the following local I/O monitor informa-
tion can be added to the transmission data after the status information. Refer
to
4-3-3 Remote I/O Area Data Configuration
for details on the local I/O mon-
itor information.
Note
For the NE1A-SCPU01-V1, N = 2. For the NE1A-SCPU02, N = 5. The size of
the local input monitor data can be specified in bytes.
Tag name
Data size
Attribute
General Status
Byte
Non-safety
Local Input Status 1 to N (See
note.)
Byte
Safety
Local Output Status
Byte
Safety
Test Output/Muting Lamp Sta-
tus 1 to M (See note.)
Byte
Non-safety
Local I/O Monitor
Data size
Attribute
Local Input Monitor 1 to N (See note.)
Byte
Safety
Local Output Monitor
Byte
Safety
!
WARNING
Serious injury may possibly occur due to loss of required safety functions. The
necessary measures for safety data are not taken for data with the non-safety
data attribute from NE1A-series Controller's internal status information allocated
to the Safety Master. Therefore, do not use this data to configure the Safety Con-
trol System.
Summary of Contents for NE1A-SCPU01 - 07-2009
