![background image](http://html1.mh-extra.com/html/omron/fh-1-series/fh-1-series_user-manual_742686356.webp)
WWW.NNC.IR
Macro Reference
354
Vision System FH/FZ5 Series
User’s Manual (Z340)
UdpNormal
TCP Normal communication
IoModule identification name
UdpNormal
UdpNormal2 (Fxxx series method)
Overview
This is a module is for sending and receiving commands and data by Ethernet UDP protocol.
System data
(*) If the input port number and the output port number are the same setting, set the output port number to -1.
Supported functions
Identification
Meaning
Initial value
enableDhcp
Enable DHCP
0: Disabled
1: Enabled
0
ipAddress
IP address of the system
10.5.5.100
subnetMask
Subnet mask
255.255.255.0
defaultGateway
Gateway address
10.5.5.110
dns
DNS server address
10.5.5.1
destIpAddress
Destination IP address to send data
0.0.0.0
portNo
Port number to receive commands
9600
portNo2
Port number to send data
-1
IoInitialize
OK
---
GetPort
OK
Reference: GetPort (p.542)
PutPort
OK
Reference: PutPort (p.645)
BusyOut
---
---
JudgeOut
---
---
RunOut
---
---
GetAll
OK
PutAll
OK
Reference: PutAll (p.643)
ReceiveData
OK
Reference: ReceiveData (p.651)
SendData
OK
Reference:
SendString
OK
Reference:
ReadPlcMemory
---
---
WritePlcMemory
---
---
SetPlcData
---
---
GetPlcData
---
---
Summary of Contents for fh-1 series
