Omron fh-1 series, User Manual, Page: 101 / 882

WWW.NNC.IR
Custom Dialogs
99
3
Pe
rf
or
min
g
T
es
t M
e
as
ur
em
e
nt
/Sta
rting
O
p
er
at
ion
Vision System FH/FZ5 Series
User’s Manual (Z340)
Individual Setting Region
• Normal Dialog Box Setting Region
• Region Setting Dialog Box Setting Region
• Position Setting Dialog Box Setting Region
• Color Extract Dialog Box Setting Region
Display target unit No.
This is set to the unit that can
be selected from the display
target scene.
This specifies the number of the unit for which the dialog box is
to be displayed instead of the default settings dialog box.
The unit that can be specified depends on the type of the dialog
box.
Immediately after the dialog box is added, the unit with the
lowest unit number out of the display target units in the display
target scene is selected.
If there is no display target unit, unit 0 is selected.
If you change the measurement flow after you create a custom dialog box, change the target unit number to match the
edited measurement flow.
Parameter Set value [Factory default] Description
Dialog width
100 to 1920
[1024]
Sets the width of the dialog box.
Dialog height
100 to 1080
[768]
Sets the height of the dialog box.
Parameter Set value [Factory default] Description
Setting target figure No. [0]
Specifies the figure number for the unit to use for region
setting. The number that you can select depends on the unit
that is specified.
Parameter Set value [Factory default] Description
Position X's data No.
−
1 to 999999999
[
−
1]
Specifies the data number on the X axis for the unit to use for
position setting.
Position Y's data No.
−
1 to 999999999
[
−
1]
Specifies the data number on the Y axis for the unit to use for
position setting.
[Data reference] button ---
You can select the data number directly to enter it, or you
can enter it with the [Data reference] button.
Click the [Data reference] button to select the target data in
the [Data reference] dialog box.
Parameter Set value [Factory default] Description
Color R's data No.
−
1 to 999999999
[
−
1]
Specifies the R’s data number for the color to specify for the
unit to use for color extraction.
Color G's data No.
− 1 to 999999999
[ − 1]
Specifies the G’s data number for the color to specify for the
unit to use for color extraction.
Color B's data No.
−
1 to 999999999
[
−
1]
Specifies the B’s data number for the color to specify for the
unit to use for color extraction.
Parameter Set value [Factory default] Description
IMPORTANT