Omron fh-1 series, User Manual, Page: 710 / 882

WWW.NNC.IR
Macro Reference
708
Vision System FH/FZ5 Series
User’s Manual (Z340)
SetMeasureOut
Sets the external output setting for the measurement result.
Format
SetMeasureOut <mode>
Parameter
Return value
None.
Description
Sets the "External Output" value in the layout settings to the external output setting value specified in the
<mode> parameter. (Reference:
X Setting the Behavior of Output Signals for Each Layout (Layout Settings)
(p.90))
Even if 0 is set for the measurement result external output setting value, data is output if the SendData
function or SendString function is used in the macro customize functions.
If an incorrect data type is specified for a parameter, a "Type mismatch" error will occur.
Even if a non-existent number, numerical value, or combination of data types is specified for the parameter,
an "Illegal function call" error will not occur.
If the format is written incorrectly, such as writing the macro function name incorrectly, omitting a comma, or
omitting a half-width space, a "Syntax error" error will occur.
If a value outside the range -2147483648 to 2147483647 is specified as an integer parameter, an "Overflow"
error will occur.
Usage Cautions
• Execute this macro function when the BUSY signal or other measurement in progress signal is ON and
measurement is prohibited. (Reference: X State Transitions and Execution Timing (p.227))
Even when "External Output" is OFF, data output that uses a macro function is executed.
Example
Sets "External Output" to ON in the communication command macro.
Useable Modules
Scene Control Macro / Communication Command Macro
Supported Versions
Version 3.50 or later
Related Items
Parameter
name
Data type Description
<mode> Integer type
External output setting
0: Not output externally
1: Output externally
SetMeasureOut 1
GetMeasureOut (Reference: X Details (p.536)) SendData (Reference: X Details (p.696))
SendString (Reference: X Details (p.698))