![background image](http://html1.mh-extra.com/html/omron/fh-1-series/fh-1-series_user-manual_742686282.webp)
WWW.NNC.IR
Setting the Operation Mode
280
Vision System FH/FZ5 Series
User’s Manual (Z340)
6
In the Main Window for line 1, select [Non-stop data transfer] from the [Function] menu.
The changes to the settings for line 1 are saved as the settings for line 0 without affecting the
measurement.
7
Click the [Switch Screen] button to display the Main Window for line 0.
The following processing items are supported in Non-Stop Adjustment Mode:
• When you execute [Non-stop data transfer], the results in the Trend Monitor and Expression processing units are
cleared.
• If you use an external command to switch scenes or scene groups, or change the settings of processing units while the
Controller is in RUN mode, the results of those changes will not be applied when you change to line 1 (Adjustment Mode)
in the Main Window.
• If you use the Non-stop Adjustment Mode after you change the scene group while the Controller is in RUN mode, you
may overwrite the scene group data unintentionally.
• The only communications commands that are accepted during a non-stop data transfer are the measurement (parallel,
non-procedure, or PLC Link) and continuous measurement (parallel only) commands.
• The larger the size of the scene group file, the longer the non-stop data transfer will take.
• The communications settings cannot be changed in Non-stop Adjustment Mode.
• Do not register a new Camera Image Input processing unit in the Non-stop Adjustment Mode Window.
• If there is not enough external memory when you are about to do a non-stop data transfer, the transfer may not start. Set
the destination for image logging to a destination that does not use external memory.
• Do not change the image mode for Non-stop Adjustment Mode.
• If you use image logging in Non-stop Adjustment Mode, the non-stop data transfer may become unavailable. To avoid
this, set the trigger frequency so that it is longer than the logging time.
• Do not change the settings for image input processing items and do not change Camera parameters in the system
settings in Non-stop Adjustment Mode.
OK:Supported processing item, RST: Processing item with restricted support, ---:Unsupported processing item
Processing item
Support
Processing item
Support
Processing item
Camera Image Input
---
Glue Bead Inspection
OK
Statistics
---
Camera Image Input FH
---
Position Compensation
OK
Reference Calib Data
OK
Camera Image Input HDR
---
Filtering
OK
Position Data Calculation
OK
Camera Image Input HDR Lite
---
Back Ground Suppression
OK
Stage Data
OK
Camera Switching
OK
Brightness Correct Filter
OK
Robot Data
OK
Measurement Image
Switching
OK
Color Gray Filter
OK
Vision Master Calibration
---
Search
OK
Extract Color Filter
OK
PLC Master Calibration
---
Flexible Search
OK
Anti-Color Shading
OK
Convert Position Data
OK
Sensitive Search
OK
Stripes Removal Filter II
OK
Movement Single Position
OK
ECM Search
OK
Polar Transformation
OK
Movement Multi Points
OK
EC Circle Search
OK
Trapezoidal Correction
OK
Detection Point
OK
Ec Corner
OK
Machine Simulator
OK
Camera Calibration
OK
Ec Cross
OK
Image Subtraction
RST(*1) Data Save
OK
Shape Search II
OK
Advanced Filter
OK
Conditional Branch
OK
Classification
OK
Panorama
OK
End
OK
Edge Position
OK
Calculation
OK
DI Branch
---
Edge Pitch
OK
Line Regression
OK
Control Flow Normal
RST(*3)
Scan Edge Position
OK
Circle Regression
OK
Control Flow PLC Link
RST(*3)
IMPORTANT
Summary of Contents for fh-1 series
