Chapter 3: Installation
!
DANGER: TIPPING RISK
. If a computer equipment rack is not ganged to
other racks, bolted to the floor, or fitted with an extending stabilizer foot, it
might tip when equipment is fully extended from the rack. Do not install equip-
ment in a rack unless you are sure that it is stable and safe.
!
DANGER: RISQUE D'INSTABILITÉ.
Si un support d’équipement inform-
atique n’est pas connecté à d’autres supports, boulonné au sol ou équipé d’un
pied stabilisateur extensible, il risque de basculer lorsque l’équipement est com-
plètement sorti du support. Ne pas installer d'équipement dans un support à
moins d’être certain qu'il est stable et sûr.
Components in the Sliding Rail Kit
The sliding rail kit provided with your Enterprise Manager 2100 appliance includes:
l
Inner sliding rail - Attach the rail to the appliance chassis.
l
Adjustable telescoping track - Use adjustable brackets to attach the track to the rack
posts.
l
Four fixed L-clamps.
l
Four adjustable L-brackets.
l
The fasteners described in Table 3-3.
Table 3-3. Rail Kit Fasteners
Type and Quantity
Threaded Length
Recommended Torque
M5 (4)
15 mm (0.59 inches)
4.5 ft-lb (6 N∙m)
M5 (8)
8 mm (0.314 inches)
4.5 ft-lb (6 N∙m)
M4 (8)
6 mm (0.236 inches)
2 ft-lb (3 N∙m)
M4, Black (8)
4 mm (0.157 inches)
2 ft-lb (3 N∙m)
Washer (8)
N/A
N/A
NOTE:
To prevent fasteners from loosening because of vibration, use Loctite
Blue 242 Adhesive, except where electrical grounding is a requirement.
Tools Required to Install the Sliding Rail Kit
You require the following tools to install the Sliding Rail Kit:
l
Phillips torque screwdriver with #2 bit.
l
Masking tape and pen to mark the rack post positions.
l
Spring or screw clamp to temporarily hold the rail in position while fastening.
l
Thread locking liquid.
14413-200 Rev. A
Enterprise Manager 2100 User’s Guide
27
Summary of Contents for Enterprise Manager 2100
Page 1: ...I631 E 01 Enterprise Manager 2100 User s Guide...
Page 36: ......
Page 60: ......
Page 82: ......
