Omron Enterprise Manager 2100, User Manual

Page: 21 / 96

Chapter 3: Installation
This chapter describes how to physically install the Enterprise Manager appliance hardware. It
includes the following topics.
3.1 Prepare Your Site for the Enterprise Manager 2100
21
3.2 Transport and Storage of the Enterprise Manager 2100
23
3.3 Unpack the Shipment
24
3.4 Sliding Rail Kit for Rack Mounting
25
3.5 Connect Power to the Enterprise Manager 2100
33
3.6 Plan for Disaster Tolerance
34
3.7 Installing a Secondary Appliance
34
3.1 Prepare Your Site for the Enterprise Manager 2100
Use this information to prepare a site for an Enterprise Manager 2100 installation.
!
WARNING: HAZARDOUS ENVIRONMENTS . Omron Adept Technologies,
Inc. does not intend that you use the Enterprise Manager appliance in haz-
ardous environments (explosive gas, water, dust, oil mist). The appliance has
an IP rating of IP20 (NEMA Type 1).
!
AVERTISSMANT: Omron Adept Technologies, Inc. n’a pas conçu l’appareil
Enterprise Manager pour être utilisé dans des environnements à risque (gaz
explosif, eau, poussière, brouillard huileux). L’appareil a un indice IP20
(NEMA Type 1).
For other technical specifications and requirements, see: Technical Specifications on page 79.
Site Rack Requirements
Each Enterprise Manager 2100 requires 1U (44.50 mm, 1.75 inches) of space in a standard 19-
inch (48.3 cm) 4-post rack datacenter rack, installed as follows:
l
The appliance requires a minimum of four support points at the sides, or a rack shelf
that provides full support for the chassis enclosure.
l
You must secure the appliance to the rack with screws. This prevents anyone from
attempting to slide the appliance out of the rack.
IMPORTANT: Do not install this appliance in a 2-post rack, or mount it by the
chassis bezel brackets ( ears ) alone. If you do not use the supplied rail kit, you use
a support shelf or support brackets that takes the full weight of the appliance.
14413-200 Rev. A Enterprise Manager 2100 User’s Guide 21