26
Enterprise Manager 2100 User’s Guide
14413-200 Rev. A
3.4 Sliding Rail Kit for Rack Mounting
You cannot install the Enterprise Manager 2100 in a 2-post (Telco style) rack. The bezel brack-
ets (
ears
) are not designed to support the chassis weight. However, you might be able to use 2-
post racks for your appliance:
l
In a non-sliding configuration that supports the chassis sides with fasteners at least 4
points.
l
On a rack shelf that fully supports the appliance.
Figure 3-2. Enterprise Manager 2100 Appliance Dimensions
Table 3-2. Callouts in Figure 1-2
Callout
Description
1
Chassis enclosure width.
2
Distance between front lock-screw holes.
!
WARNING: PERSONAL INJURY RISK.
When operating the telescoping rail
during assembly or normal use, take care that you do not insert your fingers
between moving parts.
!
AVERTISSMANT: RISQUE DE BLESSURES PERSONNELLE.
Lors de
l'utilisation du rail télescopique pendant le montage ou l'utilisation normale,
veiller à ne pas insérer les doigts entre les pièces mobiles.
!
WARNING: HEAVY COMPONENT.
Although one person can lift the appli-
ance, you might require a minimum two person lift if you install the appliance
into the upper locations of a tall (183 cm, 72 inch) rack. Take particular care if
you use step ladders or step stools.
!
AVERTISSMANT: COMPOSANT LOURD
. Bien qu’une seule personne
puisse soulever l’appareil, un nombre minimum de deux personnes pourrait
être nécessaire pour installer l’appareil dans un support haut (183 cm, 72
pouces). Prendre un soin particulier lors de l’utilisation d’une échelle ou d’un
tabouret-escabeau.
Summary of Contents for Enterprise Manager 2100
Page 1: ...I631 E 01 Enterprise Manager 2100 User s Guide...
Page 36: ......
Page 60: ......
Page 82: ......