2
E3NW-CCL CC-Link Digital Sensor Communications Unit User’s Manual (E431)
Reading This Manual
The following page structure is used in this manual.
Page Structure
4 - 5
4 Mounting and Wiring
E3NW-CCL CC-Link Digital Sensor Communications Unit User’s Manual (E431)
4-2 W
irin
g
the CC-Link Netw
ork
4
4-2-2 Prep
aring for Wiring
FANC-110SBH CC-Link Cabl
e (Kuramo Electric Co.)
Refer to documentation for the CC-Link master unit and the CC-Link Installation Guide for
specifications and processing methods (including stripping methods) for the special CC-Link cable.
35505-6000-BOMGF Powe
r Clamp Connector
1
Strip 4 cm of the insulating sheath from the CC-Link Version 1.10-compliant cable.
2
Separate the braided shield and drain wires, and then twist the drain wire with your
fingers at least 10 times.
Be careful not to sever the drain wire.
3
Cut off the braided shield, ALPET shield tape, and filler.
4
Separate the wires so that they are in the fo
llowing order: blue, white, yellow, and drain
wire.
Blue wire, pin 1 (cover label: DA B)
White wire, pin 2 (cover label: DB W)
Yellow wire, pin 3 (cover label: DG Y)
Drain wire, pin 5 (cover label: SL D)
5
Insert the cable all the way into the power clamp.
Check to confirm that the wire has been inserted all the way by looking through the top of the
cover.
6
Use pliers to push the cover into the body and crimp the cable.
7
Check to confirm that the cover is level with the body and that there is no space between
the body and the cover.
* We recommend using heat-shrinking tubing to protect the drain wire and other wiring.
Reference
For details, refer to the 3M Power Clamp Connector Wiring Procedures.
4-2-2
Preparing for Wiring
Manufacturer
Model number
F
G
M
O
B
-
0
0
0
6
-
5
0
5
5
3
M
3
o
m
o
t
i
m
u
S
Wiring the Connector
4 Mounting and Wiring
4 - 4
E3NW-CCL CC-Link Digital Sensor Communications Unit User’s Manual (E431)
4-2
Wiring the CC-Link Network
To connect the Communications Unit to the CC-Link network, refer to documentation for the CC-Link
master unit and the CC-Link Installation Guide.
• Always turn OFF the power supply before performing any wiring operations on the Communications
Unit. The external devices that are connected to the E3NW-CCL may operate in an unexpected
manner if the E3NW-CCL is wired while the power supply is ON.
• Be careful not to pinch your fingers when attaching connectors.
• Incorrect wiring will reduce safety functions. Perform all wiring correctly and confirm operation before
using the Communications Unit.
Special Screwdrivers
We recommend using the following Special Screwdrivers to tighten wiring screws when wiring the
power supply or connecting the enclosed DS-bus connector cables.
Contact Information
OMRON FA Store
Telephone: 03-5435-6481
FAX: 0120-024524 (Toll Free)
URL: http://store.fa.omron.jp/
4-2-1
General Wiring Precautions
Special Connector Tools
Model
Manufacturer (supplier)
N
O
R
M
O
C
0
0
-
Z
4
W
X
.
e
r
o
t
S
A
F
N
O
R
M
O
e
h
t
m
o
r
f
d
e
s
a
h
c
r
u
p
e
b
n
a
C
1
-
F
Z
S
Icons
(See next page.)
Level-2
heading
Gives the current
level-2 heading.
Numbered
step in procedure
These numbers indicate
a procedure.
Level-3
heading
Page tab
Gives the number of the level-1 section.
Level-2 heading
Gives the current level-2 heading.
Level-3 heading
Gives the current level-3 heading.
Level-1
heading
Manual name
Summary of Contents for E3NW-CCL
Page 1: ...E3NW CCL CC Link Digital Sensor Communications Unit User s Manual Cat No E431 E1 08 ...
Page 114: ...A Appendices A 34 E3NW CCL CC Link Digital Sensor Communications Unit User s Manual E431 ...
Page 116: ...B B 2 E3NW CCL CC Link Digital Sensor Communications Unit User s Manual E431 ...
Page 117: ......
