Omron E3NW-CCL, User Manual

Page: 39 / 118

4 - 3
4 Mounting and Wiring
E3NW-CCL CC-Link Digital Sensor Communications Unit User’s Manual (E431)
4-
1 Mou
n
tin
g
an
d R
emo
val
4
4-
1-2 R
emoval Procedur
e
4
Secure the enclosed DIN Track End Plates (PFP-M) onto the ends so that there is no
space between them and the Units. Finally, attach the protective cap you removed in step
3 to the Sensor Amplifier Unit on the far right end.
Do not reverse the order of steps 1 and 2, above. Doing
so may reduce the mounting strength on the DIN Track.
After you have completed the above procedure, check to make sure that the E3NW-CCL is
mounted securely into place.
Use the following procedure to remove the Unit.
1
Slide the Sensor Amplifier Units to separate them from the Sensor Communications Unit.
2
Press in on the Sensor Communications Unit toward the DIN Track and lift up to remove
it.
4-1-2 Removal Procedure
DIN Track End Plate
Protective cap
2
1
1 1
2 2
Do in order: step 1
and then step 2.
Do not perform
step 2 first.