3-2 Setting the Routing Tables
3-2-6 Saving Routing Tables
3-2-6
Saving Routing Tables
Use the following procedure to save the created FINS local routing tables. The FINS
local routing tables are saved in a file with the ".rtg" filename extension.
1. Select
File – Save Local Routing Table File
in the PLC Routing Table Window.
The Save As Dialog Box will be displayed.
2. Input the desired filename ("Sample" is input in this example), specify the directory
where the file will be saved, and click the
Save
Button.
The file will be saved with the ".rtg" filename extension attached ("Sample.rtg" in
this example).
3-2-7
Reading Routing Tables
Use the following procedure to read FINS local routing tables that were previously
saved.
1. Select
File – Open Local Routing Table File
in the PLC Routing Table Window.
The Open Dialog Box will be displayed.
2. Select a FINS local routing table file (.rtg) and click the
Open
Button.
The FINS local routing tables will be read.
Once the file is read, the PLC can be connected online and the file can be
transferred to the PLC.
3-2-8
Verifying Routing Tables
Use the following procedure to compare routing tables created in the CX-Integrator to
the routing tables in the PLC.
1. Select
Options – Verify Routing Table
in the PLC Routing Table Window.
The results of the verification will be displayed.
Normal Result
Error Detected
Click the
OK
Button to display detailed verification results.
Local Network Table Results
Relay Network Table Results
3-23
Summary of Contents for CX-INTEGRATOR - V1.1
