1-5 Window
Descriptions
1-5-2 Main
Window
Workspace Window
The Workspace Window lists the networks displayed in the Network Configuration Window.
Workspace Window
Project name
Network address (3 digits following #)
Network type
List of networks displayed in
Network Configuration Window
Network name
The icon to the left of the network that is currently connected and can be accessed will be
either
or
With the CX-Integrator, only one Communications Unit/port can be
accessed at any one time.) To enable accessing a network, right-click on it and select
Connect.
The actual communications configuration can then be uploaded by right-clicking
the Communications Unit/port and selecting
Transfer
−
Network to PC.
To compare the
actual communications configuration with that on the CX-Integrator, right-click the
Communications Unit/port and select
Compare.
Note: The Workspace Window corresponds 1:1 to the Network Configuration Window.
If the Network Configuration Window is closed, double-click on a network in the Workspace
Window, and the communications configuration of that network will be displayed in the Network
Configuration Window.
Note
Accessible Status for Networks
The following status is possible for a network displayed in the Workspace Window.
Display in
Workspace
Window
Status
Operation
Remarks
Accessible network
Right-click the network and
select
Connect.
Only one network can be
accessed at any one time.
Network configurations can
be uploaded or compared
only for a network in this
status.
Note: Access is possible to a
network only when it is
connected.
Inaccessible networks
Networks created offline
or networks for which the
communications
configuration has been
uploaded and then the
connection was changed to
a different network by
right-clicking and selecting
Connect
.
Note: Access is not possible
to a network that is not
connected.
1-29
Summary of Contents for CX-INTEGRATOR - V1.1
