Omron CX-INTEGRATOR - V1.1, Operation Manual

Page: 46 / 338

1-5 Window Descriptions
1-5-2 Main Window
Display in Online
Connection
Information
Window
Level Operation Remarks
Online
1) Online connection to
the relay PLC Right-click the
communications settings
for the relay PLC and
select
Auto Online or
Work Online.
Remember that this icon
indicates that the online
connection is to the relay
PLC.
TargetPLC or
TargetComponent
(See note.)
2) Status Online
connection to the
target PLC The operation is the same
as above when the relay
PLC is the target PLC.
If the target PLC is
different from the relay
PLC, upload the
communications
configuration, right-click
the target PLC, and select
Connect to this PLC.
An online connection to the
target PLC is made after
connecting online to the relay
PLC, as described above.
The following operations are
possible for the CPU Unit at
the target PLC.
I/O tables: Creating, editing,
and transferring I/O tables
Error log: Displaying current
errors and error logs
Mode setting: Changing the
operating mode
3) A connection to one
of the Communications
Units/ports at the
target PLC (Access is
possible.) Right-click the
Communications Unit/port
and select
Connect.
Only one Communications
Unit/port can be accessed at
any one time.
Communications
configurations can be
uploaded only for a
Communications Unit/port in
this status.
Note: Access is possible to a
Communications Unit/port
only when it is connected.
Access is not possible when
disconnected.
Note:To connect the computer (CX-Integrator) directly to a CompoWay/F Slave through a serial
connection, select CompoWay/F Device as the PLC model.
Offline Displays
Relay PLC Communications Settings
Online Connection
Information Window
Offline displayed.
Network Type
COM Port No., Baud Rate, Parity, Data
Bits, Stop Bits
Relay PLC’s CPU Unit
Relay PLC’s FINS destination network address
Relay PLC’s FINS destination node
Relay PLC
communications
settings
1-26