![background image](http://html1.mh-extra.com/html/omega/rd8800/rd8800_user-manual_4055199044.webp)
Page 3-18
Chapter 3 Getting Started
To
Load an existing Configuration
:
1. From the default display, press the
MENU
button to get the
Command Menu Button Bar
.
2. Press the
PROG
ram button to get the Program menu.
3. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Record Setup
and then press the
ENTER
button.
4. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Load CFG File
(
Load
C
on
F
i
G
uration) and press the
ENTER
button.
5. A pop up window will display
load config=NO*
. Press the
YES
button to change the message to
load config=YES?
and then press the
ENTER
button. The unit will look on the disk/card for any configura-
tion files and the File Directory will display any files found (see example below).
File Directory
Configurations:
→
→
→
→
→
OLDFILE
.CFG
←
←
←
←
←
(Date) (Time) (Size)
NEWFILE
.CFG
6. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to move the arrows next to the configuration file you want to load and then
press the
ENTER
button. The unit will load the selected configuration file from the disk/card, and a window will
pop up indicating
Configuration Loaded
.
7. Press the
OK?
button. The Recorder will then restart itself to recognize the new settings.
3.13 Browsing, Searching, Compressing and Expanding Data
If the
Graphics Area
is displaying the full screen Trend Chart or the full screen Alarm/Events Data Window, the
BROWS
button appears in the
Main Button Bar
. The
BROWS
button allows the user to browse, search or
compress either data from the disk/card (including the file currently being recorded to disk/card) or immediate past
data which is buffered to memory (RAM). The operation of browsing is the same whether the user is browsing
memory or file data. When using the Trend Chart, browsing allows the user to view historic data of the pens
currently trending on the display or saved on the disk/card, without affecting any real time data acquisition. Alarm
data can also be browsed from memory when using the Alarm/Events Data Window.
When on the full screen Trend Chart, the
BROWS
button on the Main Button Bar brings up the
Browse Source
Button Bar
with three buttons: FILE , RAM and EXIT, as shown in Figure 3-14 below.
Press the
FILE
button to browse prerecorded files on the disk/card. Press the
RAM
button to browse Trend data
from memory. Press the
EXIT
button to return to the real time view.
Figure 3-14 The Browse Source Button Bar
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com