Appendix C – Configuring a J type T/C input for a 100 - 750°C range
Page 3 of 5
You will now be back at the menu starting with
Point tag
.
Use the up/down arrow keys to select
Compensation
and
touch
ENTER
. Use the up/down arrow keys to select
Local
comp
and touch
ENTER
. The Recorder will now use a
temperature sensor located at the rear of the recorder to
correct for cold junction error. You must touch
EXIT
to
leave this menu.
You should now be back at the
Point tag
menu. Use the up/
down arrow keys to select
Eng units
and touch
ENTER
.
You will be prompted with
units
(°C or °F). For this
example use the up/down arrow keys to select
°C
and touch
ENTER
.
Use the up/down arrow keys to select
Chart/Pens
and touch
ENTER
.
You will again be in the
Point tag
menu. Use the up/down
arrow keys to select
Chart scale
and touch
ENTER
. You
will be prompted with
chart scl=
. Use the up/down arrow
keys to select
A
and touch
ENTER
. Now touch
EXIT
. You
will be prompted with
keep setup?
. Touch
YES
and you
will be returned to the main programming menu.
11.
12.
13.
14.
The menu starting with
Point tag
will again be displayed.
Use the up/down arrow keys to select
Decimal fix
and touch
ENTER
. You will be prompted with
places>?
(0 or 1). Use
the up/down arrows to select zero or one decimal place for
thermocouples. For this example select
1
and touch
ENTER
.
10.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
