![background image](http://html1.mh-extra.com/html/omega/rd8800/rd8800_user-manual_4055199043.webp)
Chapter 3 Getting Started
Page 3-17
3.11 Setting the Disk Full Alarm
It is possible to set a threshold to indicate when the disk is full. The indication is via a pop up window on the screen,
or if the relay option is fitted, via a contact closure. The threshold limit may be set by the user to any value between
1 and 100 percent.
To set the
Disk Full Alarm
value:
1. From the
Record Setup
menu use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Disk Full Alarm
and press the
ENTER
button.
2. There are three menu options:
Full setpoint, Full contact #
and
Rec. Contact #
. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Full setpoint
and press the
ENTER
button.
3. An alphanumeric keypad will appear and you will be asked for the
setpoint?
at which the disk/card will indicate
nearly full (0 to 100 percent, where 0 implies do not indicate disk full). Use the alphanumeric keypad to enter
the
setpoint
percentage and then press the
ENTER
button.
4. If the relay option is fitted, use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Full contact #
and press the
ENTER
button. A window will appear asking for the
Full contact #?
. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to choose
a relay contact number (1 through 6, or 0 for no contact closure) and then press the
ENTER
button.
6. Press the
EXIT
button to return to the
Record Setup
menu.
A message will pop up on the display when the disk/card usage equals the percentage value entered above and the
corresponding relay contact will close. Note that in all cases a message will pop up on the display and the relay
contact will close when the disk/card is full.
3.12 Saving and Loading Configuration Files
Once all the points have been set up and all other data has been programmed, it is advisable to save the configuration
to disk/card. Thus if the user needs to change any parameters for a different recording session, the prior settings
can be recovered by loading a previously saved configuration file.
To
Save the Configuration
:
1. From the default display, press the
MENU
button to get the
Command Menu Button Bar
.
2. Press the
PROG
ram button to get the Program menu.
3. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Record Setup
and then press the
ENTER
button.
4. Use the
UP (
↑↑↑↑↑
)
or
DOWN (
↓↓↓↓↓
)
button to highlight
Save CFG File
(
Save
C
on
F
i
G
uration) and press the
ENTER
button.
5. A pop up window will display
save config=NO*
. Press the
YES
button to change the message to
save config=YES?
and then press the
ENTER
button to save the configuration with the current filename
to the disk.
SAVE CFG
will show in the
Disk Status
area and then a window will pop up indicating
Configuration Saved
.
6. Press the
OK?
button and then press the
EXIT
button three times to return to the default display.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com