Figure 2 Relay Board Installation
Page 2 of 2
Install Relay Option
To install the 3 or 6 Channel Mechanical or Solid State Relay Option into the DIN Standard [144 mm x 144 mm]
Data Recorder:
1. Unplug the recorder.
2. Plug the connector and metal tabs of the Relay option into the recorder case as shown in Figure 2.
3. Install two #4-40 x 1/4 flat head screws as shown below to secure the Relay option.
4. Plug the recorder in. The unit will automatically recognize the addition of the Relay option.
Relay Connector
Screw Relay option into the
bottom of the recorder.
Metal Tabs
Relay connector
on circuit boared
not shown
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
