Olympia Omega 1640 Page 41 User Manual Download

Page: 41 / 327

1-19

sta

llat

ion

per

ion

Chapter 1

Transporting the machine

If you need to transport the machine over a long distance, consult your service repre-
sentative.

Care of machine supplies

Use the following precautions when handling the machine supplies (toner, paper,
etc.).

Store the supplies in a location that meets the following requirements:

– Free from direct sunlight
– Away from any heating apparatus
– Not subjected to high humidity
– Not extremely dusty

Paper that has been removed from its wrapper but not loaded in the machine
should be stored in a sealed plastic bag in a cool, dark place.

Use only toner that has been manufactured specifically for this machine. Never
use other types of toner.

Keep all supplies out of the reach of children.

WARNING

Be careful not to spill toner inside the machine or get toner on your clothes or
hands.

If your hands become soiled with toner, immediately wash them with soap and
water.

If toner gets in your eyes, immediately flush them with water, and then seek
professional medical advice.

Summary of Contents for Omega 1640








































































































































































































































































































































Search results

Summary of Contents for Omega 1640

Reviews:

Related manuals for Omega 1640

Brands by name

Popular brands

Olympia Omega 1640, User Manual

Search results

Summary of Contents for Omega 1640

Reviews:

Related manuals for Omega 1640

Brands by name

Popular brands