Olympia Omega 1640 Page 27 User Manual Download

Page: 27 / 327

1-5

sta

llat

ion

per

ion

Chapter 1

Power plug

WARNING

• Do not unplug and plug in the power cord with a wet

hand, as an electrical shock could result.

• Plug the power cord all the way into the power outlet.

Failure to do this could result in a fire or electrical
shock.

CAUTION

• Do not tug the power cord when unplugging. Pulling

on the power cord could damage the cord, resulting
in a fire or electrical shock.

• Remove the power plug from the outlet more than

one time a year and clean the area between the plug
terminals. Dust that accumulates between the plug
terminals may cause a fire.

Grounding

WARNING

• Connect the power cord to an electrical outlet that is

equipped with a grounding terminal.

Summary of Contents for Omega 1640








































































































































































































































































































































Search results

Summary of Contents for Omega 1640

Reviews:

Related manuals for Omega 1640

Brands by name

Popular brands

Olympia Omega 1640, User Manual

Search results

Summary of Contents for Omega 1640

Reviews:

Related manuals for Omega 1640

Brands by name

Popular brands