manualshive.com logo in svg

Olympia Omega 1640, User Manual

Share
Download
Olympia Omega 1640 User Manual Download Page 25

1-3

In

sta

llat

ion

 a

nd 

o

per

at

ion

 p

re

c

a

u

ti

on

s

Chapter 1

Disassemble and modification

WARNING

• Do not attempt to remove the covers and panels 

which have been fixed to the product. Some products 
have a high-voltage part or a laser beam source in-
side that could cause an electrical shock or blindness.

• Do not modify this product, as a fire, electrical 

shock, or breakdown could result. If the product em-
ploys a laser, the laser beam source could cause 
blindness.

Power cord

WARNING

• Use only the power cord supplied in the package. If 

a power cord is not supplied, only use the power cord 
and plug that is specified in POWER CORD IN-
STRUCTION. Failure to use this cord could result in 
a fire or electrical shock.

• Use the power cord supplied in the package only for 

this machine and NEVER use it for any other prod-
uct. Failure to observe this precaution could result in 
a fire or electrical shock.

• Do not scratch, abrade, place a heavy object on, heat, 

twist, bend, pull on, or damage the power cord. Use 
of a damaged power cord (exposed core wire, broken 
wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, 
immediately turn OFF the power switch, unplug the 
power cord from the power outlet, and then call your 
authorized service representative.

Summary of Contents for Omega 1640








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands