Olivetti d-Color MF450, Reference Manual

Page: 306 / 524

4 Box Operations
4-40 d-Color MF550/MF450
Specifying finishing settings
Specify settings for collating, grouping, stapling, hole punching or folding/binding (d-Color MF550)/center
stapling/folding (d-Color MF450). Settings can be specified for the following.
d-Color MF550:
!
Detail
The feeding method when a finisher is installed can be changed from Administrator mode.
When a Fold/Bind setting is selected, "Sort" is automatically selected, and the "Group", Offset, Staple
and Punch settings are canceled.
2
Reminder
In order to select a Fold/Bind setting, all of the following conditions must be met.
The paper width must be between 182 and 314 mm.
The paper length must be between 257 and 458 mm.
In order to use a Fold/Bind setting, optional finisher FS-608 must be installed.
Parameter Description
Sort Select this setting to feed out copies of the document by sets.
Group Select this setting to feed out copies of the document by page.
Offset Select this setting to separate the sets or pages of the copies.
If a finisher is installed, the printed pages are fed out with each set shifted to separate
it.
If no finisher is installed, the printed pages are fed out sorted in an alternating criss-
cross pattern.
Staple Select one of these settings to bind copies with a staple in the corner (upper left or
upper right) or with two staples. The stapling position can also be selected.
Punch Select a setting to punch holes in copies. The position of the punched holes can also
be selected.
Half-Fold (Fold/Bind): Select this setting to fold copies in half before feeding them out.
Center Staple & Fold
(Fold/Bind): Select this setting to staple copies at two places along the center, then fold the cop-
ies in half before feeding them out.
Tri-fold (Fold/Bind): Select this setting to fold copies in three before feeding them out.