Olivetti d-Color MF450 Reference Manual Download Page 137

Page: 137 / 524

d-Color MF550/MF450

2-101

Copy Operations

The Sheet/Cover/Chapter Insert screen appears.

Touch [Cover Sheet].

The Cover Sheet screen appears.

Select the desired cover page settings.

–

To cancel the setting and select the default, press the [Reset] key.

–

To cancel the "Cover Sheet" function, touch [No].

–

The default setting for the paper tray loaded with cover pages can be specified from the Utility
mode.

If desired, touch [Paper] under "Front Cover" or "Back Cover".

The corresponding Cover Paper screen appears.

Select the paper tray loaded with the paper for the cover pages.

Touch [OK], and then touch [OK] in the next two screen that appears.

Specify any other desired copy settings.

Summary of Contents for d-Color MF450













































































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Color MF450

Reviews:

Related manuals for d-Color MF450

Brands by name

Popular brands

Olivetti d-Color MF450, Reference Manual

Search results

Summary of Contents for d-Color MF450

Reviews:

Related manuals for d-Color MF450

Brands by name

Popular brands