Page: 179
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
4.7 REPORTS
4.7.01 Activity
The Activity Report lists the Date, Time, Length of Session (in minutes), Total Pages, and the
Service Code. The Service Code represents the result of each activity. Service Codes are used to
determine if the session ended normally or not and are grouped as follows.
Service Code Type
Service Code Group
Normal Termination Service Code in all modes
0000
Error while dialing - Phase A
1xxx
G3 Transmission - Phase B
2xxx
G3 Reception - Phase C
3xxx
G3 Transmission - Phase D
41xx
Miscellaneous Service Codes
6xxx & 9xxx
The Activity Report can be requested in two ways.
· Automatic
The Activity Report will be printed after every 30 transmit or receive sessions
· Manual
The Activity Report will list the 30 most recent sessions.
NOTE:
To enable the Manual Activity Report, Refer to REPORTS - ACTIVITY REPORT, in the Okifax
1000 Operators Guide.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for OF1000
Page 146: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 185: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 208: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 260: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
