Page: 185
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
4.8.01 Toner Counter Reset
You must reset the Toner Counter whenever you replenish toner. To reset this counter, perform
the following actions.
1. Press
SELECT FUNCTION.
2. Press
RIGHT ARROW
twice.
3. Press the
"7"
Key.
The following message will be displayed.
7: PRT. COUNTER CLEAR?
YES NO
4. Press
LEFT ARROW
twice.
The following message will be displayed.
ARE YOU SURE?
5. Press
LEFT ARROW
to reset the toner counter.
6. Press
SELECT FUNCTION
to exit the procedure.
Verify the counter has been RESET as follows.
1. Press
SELECT FUNCTION.
2. Press
RIGHT ARROW
.
3. Press the
"9"
Key.
4. Press
LEFT ARROW.
The contents of the counter will be displayed on the LCD for approximately four seconds.
5. Press
STOP
to exit the procedure.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for OF1000
Page 146: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 185: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 208: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 260: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
