![background image](http://html1.mh-extra.com/html/okidata/of1000/of1000_service-manual_3619431174.webp)
3. Remove the bearing (2).
4. Slide the hopping roller assembly (3) in the direction of arrow A and remove the roller.
NOTE:
The hopping roller assembly consists of the hopping roller shaft and the hopping roller rubber. To
replace either of these parts, order the assembly.
There are two one-way clutch gears (called the hopping roller clutch gear) used in two places.
One is with the registration roller. The other is with the hopping roller assembly.
Lubrication
Lightly lubricate the points where the hopping roller assembly contacts either the frame or the
bearings.
Refer to Section 3.5 of this Service Handbook for lubrication details
.
P/N 51228901 Gear: Hopping Roller Clutch
RSPL B.2.06
P/N 51607402 Bearing
RSPL B.2.06
P/N 51112601 Roller: Hopping Assembly
RSPL B.2.06
P/N N/A Rubber: Hopping Roller
RSPL B.2.06
P/N N/A Shaft: Hopping Roller
RSPL B.2.06
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for OF1000
Page 146: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 185: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 208: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 260: ...Partner Exchange BPX for any updates to this material http bpx okidata com...