![background image](http://html1.mh-extra.com/html/okidata/of1000/of1000_service-manual_3619431120.webp)
Page: 88
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
3.2.22 Upper Feed Roller Assembly
1. Perform these procedures:
3.2.01
3.2.15
3.2.20
3.2.21
2. Remove the three screws (1).
3. Remove the left (2) and right (3) ADF ground plates.
4. Rotate the bearings (4) as shown in Figure A.
5. Lift the feed roller assembly (5) straight up, and then slide it in the direction of Arrow B to
remove.
NOTE:
The upper feed roller assembly consists of the feed roller one, the Z28 gear, the ADF bearings,
and the compression washers. To replace of these parts, order the assembly.
Cleaning
Clean the upper feed roller assembly as necessary.
Refer to Section 3.4 of this Service
Handbook for cleaning details
.
Lubrication
Lightly lubricate the Z28 gear.
Refer to Section 3.5 of this Service Handbook for lubrication
details
.
P/N N/A Screw
RSPL B.2.14
P/N 53344601 Plate: ADF Ground (Left)
RSPL B.2.14
P/N 53344602 Plate: ADF Ground (Right)
RSPL B.2.14
P/N 50406301 Roller: Upper Feed Assembly
RSPL B.2.14
P/N N/A Roller: Feed (1)
RSPL B.2.14
P/N N/A Gear: Z28
RSPL B.2.14
Summary of Contents for OF1000
Page 146: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 185: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 208: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 260: ...Partner Exchange BPX for any updates to this material http bpx okidata com...