Page: 78
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
3.2.12 Gear Frame Assembly
1. Perform these procedures:
3.2.01
3.2.09
3.2.11
2. Disconnect the cable from the transmit stepper motor. (Not shown)
3. Remove the five screws (1).
4. Remove the gear frame assembly (2).
NOTE:
The gear frame assembly includes the gear frame, the Z43 gear, the Z31/19 gear, the Z81/15
gear, the heat sink, the ADF earth plate, the F2 earth plate, the screws, and the spring washer. To
replace any of these parts, order the assembly.
Lubrication
Lightly lubricate the gears in the gear frame assembly.
Refer to Section 3.5 of this Service
Handbook for lubrication details
.
P/N 53343401 Frame: Gear Assembly
RSPL B.2.09
Summary of Contents for OF1000
Page 146: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 185: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 208: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Page 260: ...Partner Exchange BPX for any updates to this material http bpx okidata com...