OKIDATA OF1000, Service Manual

Page: 287 / 357

Page: 190
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Technical Function (TF) Listing
TF
No
. Name Purpose Defaul
t
01 Line Monitor Control Change the monitoring range:
ON: Off-Hook to DCN OFF:
Off-Hook to DIS OFF
02 Automatic Protocol
Dump Select Reports handshaking and
protocol data for each
communication OFF
03 Automatic MCF
printout upon
detecting a
communication error Selecting automatic printout of
the Message Confirmation Report
upon detecting a communication
error OFF
04 TSI Print Selects the printing of TSI
data from the sending FAX on
the received picture. TSI is
printed at the leading edge of
the first page only. ON
05 Reverse Polling Selects the reverse poll
function OFF
06 Continuous Polling Placing a document on the ADF
tray selects the polling mode
without the need to operate the
SELECT FUNCTION Key. Allows
continuous loop RX poll of
auto-dial group. OFF
07 MH Only Limits image compression to
Modified Huffman Code only. OFF
08 Shorten Protocol Shortens protocol to save
transmission time. ON
09 Call-Back Message In a case where the remote
station does not respond to a
Voice Request a fax is sent
requesting a voice callback. ON
10 Personal ID Enables the transmission of the
upper 16 characters of the
sender ID as the Personal ID.
The Personal ID will appear on
the remote station's display
and on the remote station's
Activity Report. ON