- 16 -
Checking the accessories
Make sure that you have all the accessories supplied with the machine.
•
Be sure to start with the consumables that come with this machine. If you install consumables other than the
accessories first, the service life may not be displayed correctly, or the accessories may not be usable later.
• Main unit
• Toner cartridge
•
The number of printable pages of a toner cartridge is approximately 5,000 (which is the reference value in
our in-house test of printing 25.4 mm (1 inch) black square blocks on 216 mm x 58 mm paper).
• Guide rib x4
x 4
•
The guide rib is a part that prevents the front edge of the paper from falling into the gap near the paper
sensor and thus causing a paper jam. For details, refer to
"Installing the guide rib" (Page 103)
.
Summary of Contents for PRO330S
