- 212 -
Paper winds around the roller of the fuser unit
Possible causes
Solution
Reference
The media weight is set
incorrectly.
Set an appropriate value for
[Media Weight] in the user-
defined paper settings of the
printer driver.
If you do not use the printer
driver, click [MENUS] - [FEEDER
CONFIG] - [MEDIAWEIGHT] on
the operator panel, and set an
appropriate value.
information in the printer
driver
Thin paper is used.
Use thicker paper.
There is near-solid filling at
the front edge of paper.
Try leaving a margin at the front
edge of paper.
-
The paper winds around the belt unit
Possible causes
Solution
Reference
Thin or soft paper is used.
Use thicker paper.
-
Corners of the paper are folded (the edge is folded)
Possible causes
Solution
Reference
The paper is curled.
The paper is curled. Use the
paper stored at appropriate
temperature and humidity.
"380:PAPER JAM" occurs when no paper is loaded
Possible causes
Solution
Reference
When performing sensor
calibration, the paper sensor
may be misaligned and an
incorrect value may
have been detected.
From the operator panel,
execute [BOOT MENU] -
[SENSOR RESET].
Summary of Contents for PRO330S
