Oki PRO330S, User Manual, Page: 86 / 280

- 86 -
Applicable paper
• Paper form
• If you want to use die-cut labels, refer to the Label Printing Manual.
Paper form Description
Continuous Paper A roll of paper, or
paper folded along the perforations
Cut Paper Paper cut into rectangles with a width of 25 mm to
86 mm and a length of 53 mm to 551 mm
Die-cut label A customized label that has been die cut
• Paper Type
Paper Type Description
Plain High-quality paper
• Types of marks to be used as a reference when cutting paper
• Paper without marks will be cut to the specified length.
Mark type Description
Black mark Mark position: Surface or back of the paper
Hole
• Do not use the following types of paper. Otherwise poor printing may be caused or the machine may malfunction.

Paper whose end face of the roll is not cut clearly

Paper joint with tape in the middle of the roll

Paper taped or glued onto the winding core

Labels without liner or with exposed glue on the back

Paper with labels easy to peel off or peeled off

Paper with glue from the label exposed to the liner or adhering to the label surface

Paper with holes (excluding holes for cutting position detection)

Paper with cuts (excluding notches for cutting position detection)

Paper with perforations

Paper with different label sizes within one roll

Paper with different paper widths within one roll

Media of which both the liner and label are transparent

Continuous paper which is transparent

Metal foil media or conductive paper

Inkjet paper/label

Continuous labels

Paper with oozing glue on the liner

Paper with smooth surface, rough paper, and paper with different front and back roughness

Paper that is too thin or too thick, or with too much paper dust

Wet (damp) paper

Paper stuck by static electricity

Paper whose surface has been textured, embossed and coated