- 225 -
Opening the web page
•
Set the security level of your browser to medium or enable Cookies.
•
The admin password is required to enter [Admin Setup]. The factory default password is "999999".
•
Administrator login is required to change the machine settings on the web page.
The following explanation uses the following environment as an example.
•
Name of the machine: Pro330S
•
IP address of this machine: 192.168.0.2
1
Start the web browser.
2
Input the URL "http://(this machine's IP address)" in the address bar, and
press the <Enter> key.
•
For the IP address of this machine, refer to
"Checking by printing a Report" (Page 56)
•
If the IP address includes values of 1 or 2 digits, do not add "0" before such values. Otherwise,
communication may fail.
-
Correct: http://192.168.0.2/
-
Wrong: http://192.168.000.002/
Summary of Contents for PRO330S
