Oki PRO330S, User Manual

Page: 240 / 280

- 240 -
Using the access control function with the MAC address
You can use the MAC address to control the access to this machine. You can allow or deny the
access from the specified MAC address.
• Be sure to specify the correct MAC address. If you specify an incorrect MAC address, you will not be able to access
the machine using the network.
1
Open the web page of this machine.
•
For details on how to open it, refer to "Opening the web page" (Page 225) .
2
Log in as an administrator.
3
Select [Admin Setup].
4
Select [Network] - [Security] - [MAC Address Filtering].
5
Configure the settings by following the on-screen instructions.
•
If nothing is registered in [Administrator's MAC Address setting], access to this machine may be disabled
depending on the specified MAC address range.
•
If you are using a proxy server, [Your Current Local Host/Proxy MAC Address] may not match the MAC
address of the current host.
6
Click [Submit].
The new settings will take effect after the network function of the machine has been reset.
•
You cannot specify or deny the access control individually for each address.