- 201 -
Edges of text are blurred
Possible causes
Solution
Reference
The LED head is dirty.
Wipe it with soft tissue paper.
The paper is moist.
Replace with new paper.
Toner comes off due to rubbing
Possible causes
Solution
Reference
The media weight is set
incorrectly.
Set an appropriate value for
[Media Weight] in the user-
defined paper settings of the
printer driver. Alternatively,
increase the setting value for
[Media Weight].
If you do not use the printer
driver, click [MENUS] - [FEEDER
CONFIG] - [MEDIAWEIGHT] on
the operator panel, and set an
appropriate value. Alternatively,
increase the setting value for
[MEDIAWEIGHT].
Specks appear on glossy paper
Possible causes
Solution
Reference
The media weight is set
incorrectly.
Set an appropriate value for
[Media Weight] in the user-
defined paper settings of the
printer driver. Alternatively,
increase the setting value for
[Media Weight].
If you do not use the printer
driver, click [MENUS] - [FEEDER
CONFIG] - [MEDIAWEIGHT] on
the operator panel, and set an
appropriate value. Alternatively,
increase the setting value for
[MEDIAWEIGHT].
Summary of Contents for PRO330S
