Oki PRO330S, User Manual

Page: 53 / 280

- 53 -
Printing demonstration pages
• Use cut paper with the following sizes or continuous paper (roll paper) without marks. Operation cannot be
guaranteed for other types of paper.
[When printing on cut paper]
Prepare paper with a width of 74 mm and a length of 210 mm.
You can print on anything 1/4 the length of A4 or Letter paper.
Go to [MENUS] - [FEEDER CONFIG] - [PAPER FORM] - [CUT PAPER], make settings before printing.
[When printing on continuous paper (roll paper)]
Prepare continuous paper (roll paper) with a width of 74 to 86 mm without marks.
Go to [MENUS] - [FEEDER CONFIG] - [PAPER FORM] - [CONTINUOUS PAPER],
or [MENUS] - [FEEDER CONFIG] - [CUT TYPE] - [LENGTH], make settings before printing.
1
Check that "READY TO PRINT" appears on the display.
2
Load the paper.
3
Press « ∧ » or « ∨ » to display [DEMO PAGE].
4
Press «OK».
5
When [DEMO1/EXECUTE] is displayed, press «OK».