- 92 -
• About roll paper
Roll core outer diameter
203.2 mm or below
Roll core inner diameter
50.8 mm or above
Roll core outer diameter
Not specified
Printing side
Only the outer side
Notes
Roll end: Roll paper should not be taped or glued to
the winding core.
Paper joint: Do not use roll paper with joints in the
middle.
• Paper with perforations
V
Paper feed direction
Paper thickness
0.0080 - 0.250 mm
Cut position
V
1.5 mm or above
•
For paper with perforations, cut at a position 1.5 mm or more below the perforations.
• Mark-based cut position and paper length settings
When cutting paper based on black marks or holes, this machine detects marks within a
rang of the specified paper length
±
about 18 mm from the front edge of the paper. The
paper is cut based on the first valid mark detected within this range.
Furthermore, if the cut type is a black mark and the cut position (the distance from the black
mark to the paper cut) is set, the mark detection range moves by the specified cut position.
Front edge of paper
Front edge of paper
Mark
detection
range
Mark
detection
range
Cut position
Cut position = 0
(Recommended)
Paper length
Paper length
Cut position
Approx.
18mm
Approx.
18mm
Approx.
18mm
Approx.
18mm
Summary of Contents for PRO330S
