NOTE: Clean platform using
(2.A)
(2.B)
(2.F)
Isopropyl Alcohol before installing
into modeler.
Open the chamber door.
Align platform’s rear notch
into x-carriage’s locating tab
Align platform’s front notch
into latch’s front locating tab
and secure latch.
Close the front door
and press ONLINE.
(2.C).
(2.B)
(2.D )
2.B
POWER SUPPLY
PLATFORM
INSTALLATION
2.D
Quick Reference Guide
Quick Reference Guide
B
EFORE OPERATING THE MODELER, ADHERE TO ALL PERSONAL AND
SAFE HANDLING OF MATERIALS DESCRIBED IN THE SAFETY SECTIONS
TM
OF THE PROJET USER GUIDE.
2.A
2.C
2.E
2.F
Plug p
Switch power on
Plug RJ-4C cable
into terminal on back
side of modeler and into computer’s USB
terminal.
ower cord
into power outlet on
back side of modeler and into facility’s power
outlet.
(A)
(B).
(C)
Verify facility’s electrical service rating before connecting power to
the modeler.
Facility electrical requirement:
Grounded, 1-phase electrical circuit
Service rating: 100–127 VAC, 50/60 Hz, 15A (max.)
3D Systems Confidential
B
C
B
B
A
3-D Modelers
NOTE:
A
Ethernet cable
is
required when connecting from the
modeler to the end user’s computer.
shielded
(C)
PN 305175-00, Rev. C, 10/08
TM
TM
It will be necessary to register your ProJet 3-D Production System, to access the ProJet Online User Guide. To register, type in “ projet.3dsystems.com” in
the explorer browser. You will be asked to supply a “User ID” which should be something that is easily remembered; and a password. Your password is your
modeler's serial number that is located on the back side of the machine. Once registered, an email confirmation will be sent to you with a link to 3D
Systems' 3dpedia login page. (http://3dpedia.3dsystems.com) . Please log in using the user name and password as in the confirmation email to access the
user guide.
