background image

II - 21

Section 2 - Chapter 5 - Additional Management Features

OKI OkiLAN 6120i User’s Guide

Advanced Management

Server Discovery Using the Web Configuration
Utility

1. To run the utility in Windows, click

Start

Programs

OkiNet Utilities

OkiNet

Web. Otherwise, simply select (double-click) the
OkiNet.htm file from the directory where the OKI
Java files are installed. The Security Warning dialog
box appears on your browser.

2. Click Yes on the Security Warning dialog. The Oki

Data Discovery Applet is installed. The OkiNet Web
Configuration Utility
 screen appears:

3. Select your search method from the Search Method

menu (Local Subnet, Broadcast/Unicast, or
Multicast).

If you use Broadcast/Unicast, enter the IP
address in the Address box

If you use Multicast, enter the time to live in the
Time to Live box.

4. Click Begin Search. The IP address, serial number,

and system name of the discovered printers appear.

Summary of Contents for OkiLAN 6120i




























































































































































































































Reviews: