manualshive.com logo in svg

Oki OkiLAN 6120i, User Manual, Page: 184 / 219

Share
Download
Oki OkiLAN 6120i User Manual Download Page 184

V - 10

Section 5 - Chapter 2 - Installation

OKI OkiLAN 6120i User’s Guide

Printing a Configuration Sheet

You can verify communication by printing a
configuration sheet using OkiNet for OS/2.

1. Select Configure from the main Print Server

window.

2. Select Configure Print Server.

3. Select the OkiLAN 6120i you would like to test.

4. From the options, select Print Configuration Sheet.

5. Click the Configure button.

Note: In order for the configuration sheet to print

correctly, the OkiLAN 6120i must determine if
the connected printer is a text, PCL, or
PostScript printer. The default is text. If the
connected printer is a PostScript-only printer,
you will have to reconfigure the OkiLAN
6120i to print the configuration sheet in
PostScript. The configuration sheet will print to
all connected printers.

A configuration sheet will print automatically if the
OkiLAN 6120i fails due to a network protocol error.

Summary of Contents for OkiLAN 6120i




























































































































































































































Reviews:

No comments