Oki OkiLAN 6120i, User Manual

Page: 197 / 219

VI - 6
Section 6 - Chapter 1 - OkiLAN 6120i Setup for Windows NT
OKI OkiLAN 6120i User’s Guide
Note: To obtain a version of OkiLAN Connect for
DLC that supports Windows NT, visit our FTP
site (ftp://ftp.extendsys.com/pub/printserver/
utilities/) or contact Technical Support.
Configure Port
If you have printing problems while using the OkiLAN
Connect printing port, you may check the status of the
port by selecting Configure Port under the Ports tab in
the Properties screen.
Notify On Printer Error
This feature will check the printer status prior to
printing the job. If a printer error is detected (e.g.
printer off-line or out of paper) the error description
will be given.
Notify When Printed
This feature will provide an alert when your job is
active on the printer. This may be useful if the printer is
especially busy.
Description
An optional field where you may list the location or
other useful information about the printer port.
Using the Windows NT 4.0 LPR Print
Monitor
A Microsoft LPR print monitor is shipped with
Windows NT 4.0. This print monitor is not included in
the default Windows NT installation; therefore, it will
need to be installed. In order to set up an LPR printer in
Windows NT 4.0, the system must have an IP address,
the print server must have an IP address, and Microsoft
TCP/IP printing must be installed.