ESC is for menu cancellation , protection cancellation, Error check.
Menu Cancellation
- In case of cancellation of menu Section, press esc key and get back to previous state.
Error Check
- When error occurs, there will be beep sound and error led lamp will be on.
Press ESC/ERR key to check error number.
Regards to error number, refer to 3-20.Error Message Display
Protection removal
- When product is in Protection mode, Protection message will be displayed.
And you can not control product.
After dealing with the cause of Protection mode, Press ESC/ERR Key and operate the load.
Regards to kinds of Protection, refer to 3-15. Protection
≫ Related Remote Interface Command
SYST:ERR?
PROT?
PROT:CLE
Application 1:
Error Check
SYST:ERR?
Return value: -222 "Out of data"
You can check Error Number and Contents
Application 2:
Protection Check
PROT?
Return value: "Over Voltage"
PROT:CLE
Protection Removal
1. In the front panel, you can check the error number.
By RS 232C remote interface, you can check the error number and contents.
2. Stack Memory ? FILO(First In Last Out) system. When we get the data in stack memory
Last data will come out first and first data come out last.
Queue Memory ? FIFO(First In First Out) System, when we get the data in queue memory
First data will come out first.
- 26 -
3-9. ESC
Note
