In dynamic mode, B-Memory will save and recall the data of Load to B-Memory.
▌Power Switch ON
Turn on load and check load is in OFF MODE.
▌To set the B-Memory, press SLEW/B key.
▌Use encoder to set the value of B-Memory value.
▌To save the B-Memory, press SLEW/B key one more time.
▌"
done
" will be displayed and get back to previous state.
≫ Related Remote Interface Command
DYN:MEM-B {mem-a_value}
DYN:MEM-B?
Application :
DYN:MEM-B 20
Dynamic B value Setting
DYN:MEM-B? Return value "20"
Dynamic B value Check
Note
B-Memory setting value should be higher than A-memory value.
In CC Mode, If you save data at MEM-B, it will be saved to CC Mode MEM_B.
In CV Mode, data will be saved to CV Mode MEM-B.
3-13. B-Memory
- 31 -
B
B
