1. POWER switch.
The load is turned on or off by this switch. It is adopted by following electric load's capacity.
2. Ventilation slit.
Air flow flows from front ventilation slit to rear ventilation slit compulsorily.
3. 20Char * 2Line Type LCD Display
Voltage/current and, all kinds menu/message displayed.
4. CC Mode Lamp
The load is in constant current mode.
5. CR Mode Lamp
The load is in constant resistance mode.
6. CV Mode Lamp
The load is in constant voltage mode.
7. Dynamic Mode Lamp
The load is in dynamic mode.
8. Cycling Mode Lamp
The load is in cycling mode.
9. Remote Interface Lamp
When received the remote control signal from PC and etc., it lights and automatically,
front panel keys are under "Key Lock" state.
10. Protection Lamp
Lamp is on in protection mode. You can see the protection mode text in LCD panel
You can not use any keys before ending the protection mode.
11. Error Lamp
When error occurs, lamp will be on. If errors are all checked, than lamp will be off.
12. Setting Encoder
Adjusts the voltage, current, resistance value.
- 7 -
