4. VALUE SETTING
▌Power Switch ON
Turn on load and check load is in OFF MODE.
▌Press STEP Key.
▌Set [3. VALUE SETTING] by cursor key.
▌Press STEP Key.
▌Set Cycling Step by encoder.
▌Press step key to save setting value.
ps.
When you are in CC Mode, if one step is high current value, Range is high .
≫ Related Remote Interface Command
CYC:STEP:VAL:{1 | … | 100} {value}
CYC:STEP:VAL:{1 | … | 100}?
Application :
CYC:STEP:1 10
Input 10 to Step 1.
CYC:STEP:1? Return value "10"
- 39 -
STEP
STEP
STEP
