LP Series is a highly efficient, programmable electric load (300W~1500W Capacity).
It has RS-232C, RS-485, USB Remote control interface based on SCPI Protocol.
(Standard Commands for Programmable Instruments)
General Feature
▌Easy-to-use knob control settings.
▌Big size 20Char LCD Display
▌Output ON/OFF Key.
▌Front panel Key Lock function
▌Alarm beep when events occur
▌Excellent precise and high resolution.
▌Built-in Remote Sensing for Load Voltage(V-Sensing)
▌O.V.P(Over Voltage Protection) / O.P.P(Over Current Protection)
▌O.T.P(Over Temperature Protection mode supplied.
▌Excellent load and line regulation
▌Save and confirm up to 10 error messages.
▌Memory(operating state of voltage, current, OVP,OCP,OTP) store and recall available up to 10.
▌3U * 19inch half Rack Compact Size(300W, 600W)
Remote Interface Characteristics
▌RS232C, RS485, USB
▌SCPI(Standard Commands for Programmable Instruments) adopted.
▌High speed setting & measurement
▌Programmed in abundant commands in the instrument.
▌Easy interface setting by front panel key of "I/O config".
▌Technical realization of products insulation & Floating Logic.
▌Built-in the checking of SCPI programming grammar error.
Calibration
▌No need of opening cover and instrument for calibrating and adopting software calibration.
▌Easy calibration operating by using independence or PC Interface
Factory Function
▌Initial function of 10 user memory.
▌Last state memory store and recall function (output on/off, voltage & current value and etc.).
▌The function of "Auto Key Lock & Auto cursor Move" that prevents operator's mistake.
▌Calibration restore function
▌Calibration backup function
1-1. Feature
- 1 -
1. General Information
