5. SLOPE TIME SETTING
▌Power Switch ON
Turn on load and check load is in OFF MODE.
▌Press STEP Key.
▌Set [4. SLOPE TIME SETTING] by encoder.
▌Press STEP Key.
▌Set slope time by encoder.
▌Press step key to save setting value.
ps.
SLOPE TIME SETTING is SLEW SETTING.
≫ Related Remote Interface Command
CYC:STEP:SLOPE:{1 | … | 100} { 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 }
CYC:STEP:SLOPE:{1 | … | 100}?
Application :
CYC:STEP:SLOPE:1 10
Input 10 to Step 1 slope value
CYC:STEP:SLOPE:1? Return value "10"
- 40 -
STEP
STEP
STEP
