A-Memory key will save and recall the setting data (voltage and current) in A-Memory.
▌Power Switch ON
Turn on load and check load is in OFF MODE.
▌To set A-Memory, press A key.
▌Use encoder to Set the value.
▌To save the value, press A key one more time.
▌"
done
" message will be displayed and get back to previous state.
≫ Related Remote Interface Command
DYN:MEM-A {mem-a_value}
DYN:MEM-A?
Application :
DYN:MEM-A 10
Dynamic A value Check
DYN:MEM-A? Return value "10"
Dynamic A value Check
Note
In CC Mode, MEM-A save data will be saved to CC Mode MEM-A.
In CV Mode, MEM-A save data will be saved to CV Mode MEM-A.
3-12. A-Memory
- 30 -
A
A
