ODA EX 100-12, User Manual

Page: 93 / 94

9. Cautions
Non compliance with the warnings and/or the instructions for use may damage the instrument
and/or its components or injure the operator. Keep following articles.
▌
Avoid the installation in severe cold or hot area.
▌
Do not use immediately after moved from cold area
As liquefaction phenomenon, it gives damage to the power supply
After 20~30min later, use the power supply.
▌
Do not place the liquor thing on the power supply
The use of this instrument in a wet state could result in electrical shock or fire.
▌
Avoid vibration or severe impact.
▌
Make sufficient space at the sides and rear of the power supply for adequate air circulation.
▌
Do not place the heavy things on the power supply.
▌
Avoid the electric-magnetic field as motor and etc.
▌
Do not allow any foreign matter such as metal or inflammable substance to get into the
instrument via the air holes . The penetration of any foreign matter from the ventilation
holes could result in fire . electrical shock ,or power failure.
▌
Avoid hot instrument such as iron nearby the power supply.
▌
Do not place the front panel to downside.
It will occur to break encoder knob and etc.
▌
Do not connect other kinds power sources to this power supply output bus bar.
▌
Do not connect the DUT to output bus bar when power on.
▌
Do not disassemble the power supply. The power supply can be out of order and we
do not give you the guarantee.
▌
Do not remove either the cover or panel
▌
Avoid use of damaged cables.
- 94 -