ODA EX 100-12, User Manual

Page: 68 / 94

5-8. OCP USE
▌
Enable or disable the "Over Current Protection" function.
▌
In case of a like inductivity DUT, motor, big capacity DUT and etc, occurs "OCP trip" frequently
so if it is not convenient to use the power supply, you can set disable of "OCP USE" mode.
▌
If disable the "OCP USE", the power supply doesn't cut the DC source when current level is
over OCP setting level.
▌
Function
> DISABLE Disable "OCP USE" mode.
> ENABLE enable "OCP USE" mode.
OCP USE operating
▌
Power switch on in a pressing "FACTORY" key
in a pessing
▌
Power switch ON
▌
When appearing "1. user-mem clear" message, release "FACTORY" key.
Release
▌
Enter to "6. OCP USE" mode by using cursor key.
▌
In order to set, press the "FACTORY" key one more time.
LCD Display enable
▌
Set the "enable" mode by using cursor key.
LCD Display disable
▌
To finish the "OCP USE" mode, press the "FACTORY" key one more time.
LCD Display done
≫ Related Remote Interface Command
FACT:OCP {DIS|ENA}
FACT:OCP?
Return Value(1, 0)
Apply: FACT:OCP? Return value : 0 "OCP USE" mode is disable state
FACT:OCP ENA "OCP USE" mode is changed to
enable state
- 69 -